M S Channel

M S Channel

Steel channel is a hot-rolled carbon steel made in a “C” shape. The shape provides superior structural support, making it an ideal product for frames and braces used for machinery, enclosure, vehicle, building and structural support applications. Constructed using a vertical web and top and bottom horizontal flanges with inside radius corners, it is available in a wide range of sizes and thicknesses.

Zinc Ingots, Zinc Jumbo slabs, PM Plates, Prime Plates, Second Quality Plates, Crane Rail, Rail, Defective Rail, Angle, Channel , TMT Rods

Structural Steel Section

Rationalized Sizes Of Channels

Section Dimensions mm Sectional Weight Kg/m Length m
Channels 70 X 40 X 4.8 7.14 12 & Above
100 X 50 X 5 9.56
250 X 82 X 9 34.2 12-13.5
300 X 90 X 7.8 36.3
400 X 100 X 8.8 50.1

*Can be produced,if sufficient prders are available

Below 10m/11.5m length can also be supplied

While standard length are mentioned in table above, it can supply material in any fixedlengthin the range 6-13m and DSP can supply in any fixed length in the range 5.5-11.5m

Common Grades:IS 2062/2011 and SAILMA

Copper bearing structurals are also rolled as per customer'specifications. High strength light structurals are also available as per the needs of TLT manufacture

structurals are also available in the following foreign specification:

ASTM-A-36, JIS-G-3101-SS400,BS-4360 Grades 40A ,43B, 43C, 50B, 50C,EN-10025, Grades S-275 JO,JR,S-355 JO, JR, DIN-17100 ST 37.2/44.2 (all in semi-killed quality), if sufficient orders are available.

Rolling Tolerence For Structural Steel Section As Per IS:1852


Depth Tolerence Width Of Flange Tolerence
Up to 200mm/td> +- 2.5mm upto 100mm +- 2mm
> 200 to 400mm +-3.0mm

Tolerence on weight per meter shall be +-2.5% or alternatively +4,-1% of the standard weight per meter. The permissible limits for camber and sweep shall be 0.2% of the length